The Linksys velop Mesh Wi-Fi system is designed to let smart devices in the local area have a stable internet connection. The mesh system widens the Wi-Fi range in the building and improves the speed of the network. Nevertheless, as it is a network device, it is susceptible to connectivity issues such as the Linksys velop connected but no internet.
The Mesh Wi-Fi system eliminates dead zones, your extender wasn’t able to. But when the Linksys velop connected but no internet issue comes up, you’re back to square one. No need to worry as in this blog we’ll be explaining how to solve Linksys velop connectivity issues.
Linksys Velop Connectivity Issues
The Linksys Velop Wi-Fi mesh system depends upon routers that have the same channel. Therefore, if there are more, it would interfere with the internet connection. As various devices create an overload in the channel and it is unable to communicate.
There could be several factors responsible as well, like random power outages, and smart switch deployment. There could be issues with the cable as well like loose connection cables, wrong cables, or damaged cables can be the reason for Linksys velop connectivity issues. There could be a Linksys velop node not connecting or the Linksys Velop not connecting to the modem as well. In this post, you can find the solution to all these issues.
How to fix Linksys Velop Connectivity Issues?
If the Linksys velop not connected but no internet issue persists, you can try the following steps:
Powercycle the whole network
If Linksys Velop not connecting to modem, then you can try power cycling the mesh router. All you need to do is restart the modem, turn off both devices, and turn them back on. You can try unplugging both devices and then plugging them back in as well.
When you are done power cycling the device, you can try reconnecting the devices to the mesh system. Then check if the internet connection is stronger than before.
Verify if Linksys Velop Connected but no Internet
You can check the Linksys velop no internet through the lights as well. If the light is blue on the Linksys velop, it indicates that it is connected to the internet. If there’s a red blinking light, it indicates it is out of range. If it’s just red, it indicates there’s no internet connection. If there’s a yellow or orange light, it indicates the signal is weak.
Afterward, you unplug the device and restart it. You can also verify your Intenet Service Provider (ISP) Status Velop management. Through this, you’ll know if there’s an issue from your end or theirs. If it’s from their end, then you can ask them to reboot the Linksys Velop.
Direct the IP address supply
To inspect the Linksys velop no internet issue, you are required to confirm the IP addresses of the devices linked to the nodes and ensure they are valid. All the devices with the connection should be in the same range as Velop’s DHCP server.
In order to identify the devices when the IP addresses vary, you have to keep the main node on and switch off the other nodes. When this is complete, you can reconnect your devices to check if the Linksys Velop connected but no internet issue is still there.
Control the Connection Log
If you connect numerous devices to the Linksys Velop Wi-Fi mesh system, it could cause it to crash. As it causes an overload that interferes with the network connection. You can prevent this from happening by managing the number of devices connected to the mesh system. Connect only the number of devices, recommended by Linksys.
Reset the Linksys Velop Mesh System
If none of the above things are working, and the Linksys Velop node not connecting or the Linksys Velop no internet issue still persists. You can reset the Linksys velop, as the factory settings will be restored. To fix the Linksys Velop node not connecting issue, you need to reset the nodes as well.
When the reset is complete, you’ll have to configure them again. The purple light on your Linksys Velop is an indication that it is ready for setup.
Bottom Line
These are some troubleshooting tips you can try. If you are facing any other issues, get in touch with our team.