A Complete Guide to Linksys RE7000 Extender Setup

The Linksys RE7000 AC1900 wireless range extender is a blessing in disguise for those who are unable to connect to their home network when sitting a little far away from their router. In other words, the Linksys WiFi extender is one of the most impressive yet reliable range extenders available on the market. The Linksys extender’s main task is to extend your existing wireless network by picking up its wireless signal and increasing its throughput.

The Linksys RE7000 extender setup allows you to pair your extender wtih your existing wireless router. Once you set up and configure your extender to work with your router, you get to experience an undisturbed yet extended wireless network at your premises.

This guide will teach you how to go about Linksys extender setup, Linksys RE7000 login process, etc. Once you learn this, we will talk about the Linksys RE7000 default password and how to change it.

How to prepare for Linksys RE7000 extender setup

To configure your Linksys RE7000 AC1900 extender, you must go through the instructions given below. Basically, these instructions are just shared in order to help you understand what things or points need to be remembered before the setup takes place. Refer to the points below:

Steps for Linksys RE7000 extender setup

In this section, you will walk through the steps to configure your Linksys extender with your router’s network. Please follow the steps below:

Basic setup

Firstly, take the extender out of the box and place it nearby the router.
Find a power source nearby the router.
The extender needs to be with the router only during the Linksys RE7000 AC1900 setup.
After that, plug your Linksys extender into a power outlet.
Turn On the extender and make sure the router is also active.

Connect to the extender

Next, you need to connect your computer or laptop to the extender.
You can either use a wired or wireless method for the connection.
We recommend that you connect through wired method. For that, you need to use an Ethernet cable.
Plug one end of the cable into your Linksys extender and another end into the computer.

Linksys RE7000 extender setup

This is the main section or part of the setup.
Go to your computer’s web browser and type the default web address into the address bar.
Type http://extender.linksys.com in the address bar and hit Enter.
Thereafter, you will reach the Linksys RE7000 login page.
Enter the Linksys RE7000 default password and username.
Once you access the setup wizard, the device will search for active WiFi networks.
Select your home WiFi network and enter the WiFi password.
After that, follow the on-screen instructions to configure the dual-band WiFi settings.
At last, click Save.
Finally, the Linksys RE7000 extender setup will be completed successfully.

Post-setup testing

Now that your Linksys extender has been set up successfully, you must test the network connection. Reconnect to the extender’s network and run a speed test to make sure the connection is working optimally. Moreover, you can now install your device anywhere you want. Make sure you do not place your device far away from the router.

Linksys RE7000 AC1900 setup not working. How to fix it?

Were you unable to set up your Linksys WiFi extender? Well, no issues at all! We have listed below some of the most effective yet easy troubleshooting tips to fix the issue and set up your device perfectly. Please have a look at the points below:

Firstly, ensure that your wireless extender is placed next to your wireless router.
A wired connection is a must if you are setting up the device for the first time.
Once you have set up your device, do not forget to update its firmware.
Go about the Linksys RE7000 login process and navigate to the Advanced Settings page.
Click Firmware and follow the on-screen instructions to update your device.
Most likely, the extender will start working after the update.
If the issue persists, please reboot the device and check again.

What is Linksys RE7000 default password?

The default password is mostly the same on all the Linksys extenders. However, the default password is “admin” and you must verify it by checking the product manual. You can also refer to the device info card pasted on the backside of the extender. You will find the default username, Linksys RE7000 default password, and IP address as well.

How to change the Linksys RE7000 default password?

In order to change the Linksys default password, you must login to the device. Login to the Linksys extender using extender.linksys.com. After that, go to the Administration page and look for the Change Password option. After that, follow the on-screen prompts to change the admin password of your extender.

How to get the best speed from Linksys extender?

The straightforward answer is – keep your device optimized. In other words, your extender must be working optimally in synchronization with the router. Keep your device updated to the most recent version and never place your extender too far away from the router. These tips will make sure you get the best internet speeds at all times.

Conclusion

This page was all about the Linksys RE7000 extender setup and installation. The page discussed everything about the Linksys RE7000 AC1900 range extender. Moreover, we also walked you through the tips and tricks section to help you with the setup issues.

Setting up the Linksys extenders has always been easy. You just have to make sure you follow the correct steps and enter the appropriate information. We hope you liked this page about the extender setup and installation. If you encounter any issues with your device or you have any queries, feel free to talk to our support team for more help.