Are you searching for how to setup Linksys WiFi mesh network on an iOS device? Well, the process is the same as that of an Android device. The Linksys Velop mesh router comes with mesh technology that makes multiple access points work together to emit a single WiFi network across your home or office.
Setting up the Linksys Velop router on an iOS device is quite easy and quick. You can set up and configure your Linksys Velop on an iPhone with the help of the Velop app. The Velop app is available for free on the App Store. So you can download it on your iOS device and don’t have to pay for it.
This post addresses the Linksys Velop Setup or configure their Velop WiFi network on an iOS device. Let’s start with the guide.
How to prepare for Velop setup on iPhone?
Before you perform the Linksys Velop setup on an iOS device, it is important that you follow these steps.
- Unbox your Linksys Velop and place it nearby your modem.
- After that, connect the Velop WiFi router to the power supply.
- Plug the power cable of the Linksys Velop router into the power outlet and turn it On.
- Make sure you keep an Ethernet cable nearby the setup as it will be required to connect the Velop router to the modem.
Linksys Velop router setup on an iOS device
This section of the page will guide you on how to set up the Linksys Velop router on an iOS device. Make sure you download and install the free Velop app on your iPhone or any other iOS device. Start with the outlined steps below:
- Open the Velop app on your iOS device.
- Follow the instructions to plug your router into the power outlet and connect to it.
- The Velop app will guide you to connect the router to the modem.
- Tap “It’s connected” in the app.
- Choose the ISP settings that you have on your network.
- After that, the app will prompt you to set up the login credentials of your Velop router.
- Configure the WiFi settings of your Velop network and you’re done.
- Finally, you can connect to your Velop WiFi and test whether the internet and all the features are working fine.
Troubleshooting methods for Linksys Velop mesh WiFi setup
Sometimes users get stuck with the Linksys Velop mesh WiFi setup. However, reasons may vary for the setup issues. No worries, Linksys Velop troubleshooting steps are here:
- Always use the correct login details and double-check them while typing.
- Update the Firmware of the router.
- Ensure your router has an adequate power supply.
- Reboot your Linksys Velop system to fix the temporary glitches.
- Check the cable connections and remove if the cable is damaged.
Steps to Factory reset the Linksys Velop
If none of the methods work to fix the configuration problem, then factory reset your mesh WiFi system. It will fix the glitches that you have with your Velop system. Let’s take a glance:
- To start with reset, look for the reset button on the Linksys Velop mesh WiFi system.
- Next, press and hold the reset button for 20 seconds and then release.
- Remember that you must reset the parent node as well as the child node too.
- The Velop system gets back to the default settings and you need to reconfigure it.
Final thoughts
Setting up a Linksys Velop mesh router on an iOS device is very easy and hassle-free. You just need to make sure that you follow the outlined steps very carefully in order to avoid any kind of fuss. Make sure you check for the latest firmware updates on your Velop router as soon as you set it up.
This post was all about the Linksys Velop WiFi setup on an iOS device. We hope this post helped you and that you liked it. For more help or support, please reach out to our support team.